Count Display Large Format

• Ultra bright 205mm (8 inch) digits, visible at 100 yards or more, from a wide angle, even in high ambient light areas
• A complete production board in the one unit.
• View as many as five different data values on one display.
• Displays: counts, rates and time, with decimal points, colons, plus and minus.
• Automatic or manual scrolling sequence for each data set.
• Save costs on buying several displays.

Display Information:

• Character height: 8 inches
• Scroll: 5 different data sets, manual or auto (every 2.5 seconds). e.g: gross, net, waste, speed, run/down time.
• Colour displays available in red, green, yellow, blue and white
• Case dimensions: 105 x 28 x 8 cm
• Power: 100 to 250 VAC, 2 Amps, Connector: Fused IEC socket.
• Count inputs: 24 VDC NPN or PNP at 5mA ON, Connector: 25 way D type male
• Signal inputs: 24 VDC NPN or PNP at 5mA ON, Connector: 25 way D type male.
• Network Comms: TCP/IP, Connector: RJ45 with industrial shell plug.
• The CDML display is designed to maximise the visibility of shop floor machine information.
• The flexible design allows us to tailor the unit to suit each customer’s need. Displays may consist of one or more digits.
• Ruggedly built in stainless steel, or a painted mild steel option it is designed to withstand the rigours of industrial use.
• Production data can be collected by this unit from sensors on one or more machines and be displayed clearly over a distance of 100 metres or more.
• The CDML is an intelligent system that collects its own data from machine sensors and computes and displays its own values. It can also accept data via LAN or RS232 from other systems.